Written by an author with more than 25 years of field and academic experience, Soil Improvement and Ground Modification Methods explains ground improvement technologies for converting marginal soil into soil that will support all types of structures. Soil improvement is the alteration of any property of a soil to improve its engineering performance. Some sort of soil improvement must happen on every construction site. This combined with rapid urbanization and the industrial growth presents a huge dilemma to providing a solid structure at a competitive price.
The perfect guide for new or practicing engineers, this reference covers projects involving soil stabilization and soil admixtures, including utilization of industrial waste and by-products, commercially available soil admixtures, conventional soil improvement techniques, and state-of-the-art testing methods.
- Conventional soil improvement techniques and state-of-the-art testing methods
- Methods for mitigating or removing the risk of liquefaction in the event of major vibrations
- Structural elements for stabilization of new or existing construction industrial waste/by-products, commercially available soil
- Innovative techniques for drainage, filtration, dewatering, stabilization of waste, and contaminant control and removal
Inhaltsverzeichnis
1;Front Cover;1 2;Soil Improvement and Ground Modification Methods ;4 3;Copyright;5 4;Contents;6 5;Preface;10 6;Acknowledgements;16 7;Abbreviations and Acronyms;18 8;Section I: Introduction to Ground Improvement and Soil Stabilization;20 8.1;Chapter 1: What is ``Ground Improvement?;22 8.1.1;1.1. Introduction;22 8.1.2;1.2. Alternatives to ``Poor Soil Conditions;23 8.1.3;1.3. Historical Soil and Ground Improvement;25 8.1.4;References;25 8.2;Chapter 2: Ground Improvement Techniques and Applications;28 8.2.1;2.1. Categories of Ground Improvement;28 8.2.2;2.2. Typical/Common Ground Improvement Objectives;29 8.2.3;2.3. Factors Affecting Choice of Improvement Method;30 8.2.4;2.4. Common Applications;32 8.2.5;2.5. Emerging Trends and Promising Technologies;35 8.2.6;References;36 8.3;Chapter 3: Soil Mechanics Basics, Field Investigations, and Preliminary Ground Modification Design;38 8.3.1;3.1. Soil Mechanics Fundamentals Overview;38 8.3.1.1;3.1.1. Soil Type and Classification;38 8.3.1.1.1;3.1.1.1. Soil Classification Systems;39 8.3.1.1.2;3.1.1.2. Grain Sizes and Grain Size Distributions;40 8.3.1.1.3;3.1.1.3. Plasticity and Soil Structure;42 8.3.1.1.4;3.1.1.4. Unified Soil Classification System;43 8.3.1.2;3.1.2. Principal Design Parameters;45 8.3.1.2.1;3.1.2.1. How Much?;60 8.3.1.2.2;3.1.2.2. How Long?;60 8.3.2;3.2. Site Investigations, Data, and Reports;63 8.3.2.1;3.2.1. Desk Study and Site Visit;64 8.3.2.2;3.2.2. Subsurface Exploration and Borings;64 8.3.2.3;3.2.3. Field Tests;65 8.3.2.4;3.2.4. Sampling and Laboratory Testing;74 8.3.2.5;3.2.5. Typical Geotechnical Soils Report;75 8.3.3;3.3. Preliminary Modification Design Evaluation;77 8.3.4;Relevant ASTM Standards;77 8.3.5;References;78 9;Section II: Soil Densification;80 9.1;Chapter 4: Objectives and Improvements from Soil Densification;82 9.1.1;4.1. Overview of Soil Densification;82 9.1.1.1;4.1.1. Shallow vs. Deep Densification;83 9.1.1.2;4.1.2. Processes and Equipment;84 9.1.2;4.2. Engineering Improvement Objectives;85
9.1.2.1;4.2.1. Bearing Capacity, Strength, and Stiffness;85 9.1.2.2;4.2.2. Compressibility and Settlement;86 9.1.2.3;4.2.3. Permeability and Seepage;87 9.1.2.4;4.2.4. Volume Stability (Shrinking and Swelling);87 9.1.2.5;4.2.5. Liquefaction Phenomenon and Mitigation;87 9.1.3;Relevant ASTM Standards;88 9.1.4;References;88 9.2;Chapter 5: Shallow Compaction;90 9.2.1;5.1. Methods of Shallow Compaction;90 9.2.2;5.2. Principles of Compaction/Compaction Theory;91 9.2.2.1;5.2.1. Laboratory Tests;93 9.2.2.1.1;5.2.1.1. Presentation of Laboratory Compaction Test Results;98 9.2.2.2;5.2.2. Compaction of Different Soil Types;99 9.2.3;5.3. Shallow Field Compaction Equipment;100 9.2.4;5.4. Properties of Compacted Soils;106 9.2.4.1;5.4.1. Soil Structure;106 9.2.4.2;5.4.2. 15-Point Method;110 9.2.5;5.5. Field Compaction and Specifications;113 9.2.5.1;5.5.1. Field Compaction Variables;113 9.2.5.1.1;5.5.1.1. Water Content;114 9.2.5.1.2;5.5.1.2. Weight and Number of Passes;114 9.2.5.1.3;5.5.1.3. Type of Compactor and Compaction Method;114 9.2.5.1.4;5.5.1.4. Lift Thickness;115 9.2.5.1.5;5.5.1.5. Uniformity of Source Material;116 9.2.5.2;5.5.2. Shallow Compaction Specifications;116 9.2.5.2.1;5.5.2.1. Density Requirements;117 9.2.5.2.2;5.5.2.3. Cohesionless Soils;118 9.2.5.2.3;5.5.2.3. Cohesive Soils;118 9.2.6;5.6. Compaction Control/Field Inspection;119 9.2.6.1;5.6.1. Compaction Control Tests;121 9.2.6.1.1;5.6.1.1. Density Control Tests;121 9.2.6.1.2;5.6.1.2. Volume Tests;122 9.2.6.1.3;5.6.1.3. Moisture Control Tests;124 9.2.6.1.4;5.6.1.4. Combined Tests;125 9.2.6.1.5;5.6.1.5. Accept/Reject Criteria;127 9.2.6.1.6;5.6.1.6. Performance Tests;127 9.2.7;Relevant ASTM Standards;129 9.2.8;References;131 9.3;Chapter 6: Deep Densification;134 9.3.1;6.1. Deep Densification Applications and Techniques;134 9.3.1.1;6.1.1. Blasting;135 9.3.1.2;6.1.2. Vibrodensification;137 9.3.1.2.1;6.1.2.1. Vibrodensification Equipment;138 9.3.1.2.2;6.1.2.2. Construction Methods;144 9.3.1.2.3;6.1.2.3. Compacted Aggre
gate Piers;145 9.3.1.3;6.1.3. Dynamic Compaction;148 9.3.1.4;6.1.4. Rapid Impact Compaction;152 9.3.1.5;6.1.5. Compaction Grouting;154 9.3.1.6;6.1.6. Consolidation Methods;154 9.3.1.7;6.1.7. Combined Methods;157 9.3.2;6.2. Deep Densification QC, Monitoring, and Specifications;158 9.3.2.1;6.2.1. Field Control for Deep Densification;158 9.3.2.1.1;6.2.1.1. Onboard Monitoring for Vibratory Densification;158 9.3.2.1.2;6.2.1.2. Displacement/Volumetric Measurements;158 9.3.2.1.3;6.2.1.3. Piezometers;159 9.3.2.1.4;6.2.1.4. SPT and CPT;159 9.3.2.1.5;6.2.1.5. Geophysical Measurements;161 9.3.2.2;6.2.2. Specifications for Deep Densification;161 9.3.2.2.1;6.2.2.1. Accept/Reject Criteria;164 9.3.3;Relevant ASTM Standards;164 9.3.4;References;164 10;Section III: Hydraulic Modification;168 10.1;Chapter 7: Objectives and Approaches to Hydraulic Modification;170 10.1.1;7.1. Fundamental Objectives and Improvements;171 10.1.1.1;7.1.1. Adverse Effects of Dewatering;172 10.1.1.2;7.1.2. Common Drainage Applications;173 10.1.1.2.1;7.1.2.1. Construction Dewatering;173 10.1.1.2.2;7.1.2.2. Permanent Drainage;174 10.1.1.2.3;7.1.2.3. Stabilization of Slopes, Retaining Walls, and Excavations;175 10.1.1.2.4;7.1.2.4. Forced Consolidation;175 10.1.1.2.5;7.1.2.5. Liquefaction Mitigation;176 10.1.1.2.6;7.1.2.6. Controlling Seepage and Exit Gradients;176 10.1.1.2.7;7.1.2.7. Filtering;176 10.1.1.2.8;7.1.2.8. Roadways and Pavements;177 10.1.1.3;7.1.3. Common Retention Applications;177 10.1.2;7.2. Dewatering Methods;179 10.1.2.1;7.2.1. Types of Dewatering Systems;179 10.1.2.2;7.2.2. Horizontal Drainage and Gravity Drains;179 10.1.2.3;7.2.3. Shallow Well, Sump Pumping, and Wellpoints;180 10.1.2.4;7.2.4. Deep Wells;182 10.1.2.5;7.2.5. Ejector Systems;183 10.1.2.6;7.2.6. Vacuum Wells;183 10.1.2.7;7.2.7. Electroosmosis;185 10.1.3;7.3. Well Hydraulics and Dewatering Design;186 10.1.4;7.4. Drainage Capacity, Permeability, and Tests;187 10.1.4.1;7.4.1. Groundwater Flow Terminology;187 10.1.4.2;7.4.2. Drainage
Capacity;191 10.1.5;7.5. Slope Stabilization by Dewatering/Drainage;191 10.1.5.1;7.5.1. Surface Drainage;192 10.1.5.2;7.5.2. Subsurface Drainage;193 10.1.5.2.1;7.5.2.1. Drainage Blankets;194 10.1.5.2.2;7.5.2.2. Trench Drains;194 10.1.5.2.3;7.5.2.3. Cutoff Drains;195 10.1.5.2.4;7.5.2.4. Relief Wells and Drainage Wells;195 10.1.5.2.5;7.5.2.5. Horizontal Drains;196 10.1.5.2.6;7.5.2.6. Drainage Tunnels (Galleries);199 10.1.5.2.7;7.5.2.7. Vacuum Dewatering, Siphoning, and Electroosmosis;200 10.1.6;7.6. Filtering and Seepage Control;201 10.1.7;7.7. Membrane Encapsulation;204 10.1.8;7.8. Altering Soil/Ground Hydraulic Properties;205 10.1.9;References;206 10.2;Chapter 8: Geosynthetics for Filtration Drainage, and Seepage Control;208 10.2.1;8.1. Geotextiles for Filtration and Drainage;209 10.2.1.1;8.1.1. Filtering and Geosynthetic Filtering Criteria;209 10.2.1.1.1;8.1.1.1. Geotextile Filter Applications;212 10.2.1.2;8.1.2. Geotextile Drains;214 10.2.2;8.2. Geonets, Geocomposites, and Micro Siphon Drains;216 10.2.3;8.3. Geosynthetic Hydraulic Barriers;221 10.2.3.1;8.3.1. Geomembrane Seepage Barriers;221 10.2.3.2;8.3.2. Geosynthetic Clay Liners;223 10.2.4;Relevant ASTM Standards;225 10.2.5;References;226 10.3;Chapter 9: Preconsolidation;228 10.3.1;9.1. Preconsolidation Concepts and Methodologies;228 10.3.2;9.2. Use of Vertical Drains;230 10.3.3;9.3. Vacuum-Assisted Consolidation;236 10.3.4;9.4. Instrumentation and Performance Monitoring;238 10.3.5;References;239 10.4;Chapter 10: Electro-Osmosis (Electrokinetic Dewatering);240 10.4.1;10.1. Principles of Electro-Osmosis;240 10.4.2;10.2. Applications/Improvements;243 10.4.2.1;10.2.1. Dewatering;243 10.4.2.2;10.2.2. Electrostabilization/Electrohardening;244 10.4.2.3;10.2.3. Electrogrouting;245 10.4.2.4;10.2.4. Pile Driving and Capacity Enhancement;245 10.4.2.5;10.2.5. Contaminant Retrieval;246 10.4.3;References;246 11;Section IV: Physical and Chemical Modification;248 11.1;Chapter 11: Admixture Soil Improvement;250 11.1.1;11.1. In
troduction to Admixture Soil Improvement;250 11.1.1.1;11.1.1. Benefits of Admixture Soil Improvement;251 11.1.2;11.2. Admixture Materials;252 11.1.2.1;11.2.1. Natural Soil Admixtures;253 11.1.2.2;11.2.2. Cement and Lime;256 11.1.2.2.1;11.2.2.1. Lime and Clay Mineralogy;257 11.1.2.2.1.1;11.2.2.1.1. Clay Mineralogy;259 11.1.2.2.2;11.2.2.2. Soil-Lime Reactions;261 11.1.2.2.2.1;11.2.2.2.1. Concerns of Using Lime and Cement Stabilization;263 11.1.2.2.3;11.2.2.3. Cement;265 11.1.2.2.3.1;11.2.2.3.1. Shrinkage;266 11.1.2.3;11.2.3. Fly Ash and Furnace Slag;266 11.1.2.4;11.2.4. Salts, Chlorides, and Silicates;268 11.1.2.5;11.2.5. Bituminous Admixtures (Asphalts, Bitumen, and Tar);269 11.1.2.5.1;11.2.5.1. Applications;271 11.1.2.5.2;11.2.5.2. Typical Problems with Asphalt Stabilized Soils;273 11.1.2.6;11.2.6. Polymers and Resins;273 11.1.2.6.1;11.2.6.1. Ecoalternatives;274 11.1.2.7;11.2.7. Fibers;275 11.1.2.8;11.2.8. Combined Materials;276 11.1.2.9;11.2.9. Other Recycled Materials;276 11.1.3;11.3. Application Methods and Mixing;278 11.1.3.1;11.3.1. Surface Mixing;278 11.1.3.1.1;11.3.1.1. Admixtures in Roadway (Pavement) Designs;279 11.1.3.1.1.1;11.3.1.1.1. Recycled Roadway Materials;281 11.1.3.2;11.3.2. Layering (Surface Placement) and Quicklime Piles;282 11.1.3.3;11.3.3. In Situ Mixing;282 11.1.3.3.1;11.3.3.1. Cutoffs and Slurry Walls;287 11.1.3.3.2;11.3.3.2. Deep Mixing Case Study-New Orleans Levee LPV111;288 11.1.3.4;11.3.4. Mix Design Procedures;289 11.1.3.4.1;11.3.4.1. Laboratory Testing;290 11.1.3.5;11.3.5. Grouting;291 11.1.4;11.4. Stabilization of Wastes and Contaminated Soils;292 11.1.5;Relevant ASTM Standards;293 11.1.6;Appendix. Example Specification Guide for Soil Mixing with Admixtures;294 11.1.6.1;A.1. Scope of Work;295 11.1.6.1.1;A.1.1. Reference Standards;295 11.1.6.1.2;A.1.2. Abbreviations and Definitions;296 11.1.6.2;A.2. Submittals;297 11.1.6.2.1;A.2.1. Qualifications of Contractor;297 11.1.6.2.2;A.2.2. Work Plan;297 11.1.6.2.3;A.2.3. Design Mix;298 11.1.6.3
;A.3. Materials;299 11.1.6.3.1;A.3.1. Grout;299 11.1.6.3.2;A.3.2. Cement;299 11.1.6.3.3;A.3.3. Water;299 11.1.6.3.4;A.3.4. Additives;299 11.1.6.3.5;A.3.5. SM Material;299 11.1.6.4;A.4. SM Construction;299 11.1.6.4.1;A.4.1. Tolerances;300 11.1.6.5;A.5. Equipment;300 11.1.6.5.1;A.5.1. SM Machine;300 11.1.6.5.2;A.5.2. Grout Mixing Plant;300 11.1.6.5.3;A.5.3. In situ Sampling Tool;301 11.1.6.6;A.6. Execution of Work;301 11.1.6.6.1;A.6.1. Alignment;301 11.1.6.6.2;A.6.2. Column Depth;301 11.1.6.6.3;A.6.3. Obstructions;302 11.1.6.6.4;A.6.4. Grout Plant;302 11.1.6.6.5;A.6.5. Soil Mixing and Penetration;302 11.1.6.6.6;A.6.6. Injection Rate;302 11.1.6.6.7;A.6.7. Swell Management;303 11.1.6.7;A.7. Clean-up and Treatment for Top SM Construction;303 11.1.6.8;A.8. Quality Control;303 11.1.6.8.1;A.8.1. SM Area Continuity and Depth;303 11.1.6.8.2;A.8.2. Materials;303 11.1.6.8.3;A.8.3. Grout;303 11.1.6.8.4;A.8.4. Soil Mixed Materials;304 11.1.6.8.5;A.8.5. Documentation;304 11.1.6.9;A.9. Measurement and Payment;304 11.1.7;References;304 11.2;Chapter 12: Ground Modification by Grouting;308 11.2.1;12.1. Fundamental Concepts, Objectives, and History;308 11.2.1.1;12.1.1. Improvement Objectives;309 11.2.2;12.2. Grout Materials and Properties;309 11.2.2.1;12.2.1. General Description and Properties;309 11.2.2.2;12.2.2. Cement Grouts;311 11.2.2.3;12.2.3. Chemical Grouts;313 11.2.3;12.3. Techniques, Technology, and Control;314 11.2.3.1;12.3.1. Types/Methods of Grouting;315 11.2.3.2;12.3.2. Grouting Technology and Control;322 11.2.3.2.1;12.3.2.1. Injection Pressure;322 11.2.3.2.2;12.3.2.2. Set Times;324 11.2.3.2.3;12.3.2.3. New Technology;324 11.2.3.3;12.3.3. Grouting Equipment;324 11.2.3.3.1;12.3.3.1. Batch and Pumping Systems;325 11.2.3.3.2;12.3.3.2. Packers;325 11.2.3.3.3;12.3.3.3. Pipes;325 11.2.3.3.4;12.3.3.4. Monitoring;327 11.2.4;12.4. Applications of Grouting;327 11.2.4.1;12.4.1. Water Cutoff/Seepage Control;327 11.2.4.1.1;12.4.1.1. Case Studies;328 11.2.4.1.2;12.4.1.2. Horizontal Seep
age Barriers;329 11.2.4.2;12.4.2. Ground Support;330 11.2.4.2.1;12.4.2.1. Case Studies;330 11.2.4.3;12.4.3. Ground Strengthening, Displacement, and Void Filling;331 11.2.4.3.1;12.4.3.1. Case Studies;331 11.2.4.3.2;12.4.3.2. Sinkhole Remediation;332 11.2.4.4;12.4.4. Other Grouting Applications;333 11.2.4.4.1;12.4.4.1. Grouted Anchors, Nails, and Micropiles;333 11.2.4.4.2;12.4.4.2. Pile Installation Assistance;334 11.2.4.4.3;12.4.4.3. Pressure Grouted Piles;334 11.2.5;Relevant ASTM Standards;334 11.2.6;References;335 11.3;Chapter 13: Thermal Treatments;338 11.3.1;13.1. Types of Thermal Treatments;338 11.3.2;13.2. Heat Capacity of Soils;339 11.3.3;13.3. Heat Treatment of Soils;340 11.3.3.1;13.3.1. Improvements and Applications of Ground Heating;340 11.3.4;13.4. Ground Freezing;341 11.3.4.1;13.4.1. Improvements and Applications of Ground Freezing;342 11.3.4.2;13.4.2. Ground Freezing Techniques;343 11.3.4.3;13.4.3. Example Case Studies of Ground Freezing;349 11.3.4.3.1;13.4.3.1. Shafts and Tunnels;349 11.3.4.3.2;13.4.3.2. Mining;352 11.3.4.3.3;13.4.3.3. TBM Rescues;354 11.3.4.3.4;13.4.3.4. Containment of Hazardous Contaminants;356 11.3.5;References;357 12;Section V: Modification with Inclusions and Confinement;360 12.1;Chapter 14: Geosynthetic Reinforced Soil;362 12.1.1;14.1. History, Fundamentals, and Materials for Soil Reinforcement;362 12.1.1.1;14.1.1. History of Soil Reinforcement;362 12.1.1.2;14.1.2. Soil Reinforcement Materials;363 12.1.1.3;14.1.3. Soil Reinforcement Fundamentals;368 12.1.2;14.2. MSE Walls and Slopes;369 12.1.2.1;14.2.1. Geosynthetic Reinforced Wall and Slope Basics;369 12.1.2.2;14.2.2. Failure Design Modes;370 12.1.2.3;14.2.3. Reinforcement Design for MSE Walls;373 12.1.2.4;14.2.4. Reinforcement Design for Reinforced Soil Slopes;376 12.1.3;14.3. Other Geosynthetic Reinforcement Applications;378 12.1.3.1;14.3.1. Reinforced Foundation Soils;378 12.1.3.2;14.3.2. Support of Load-Bearing Foundations;379 12.1.3.3;14.3.3. Roadway Applications;380 12.1.3.
3.1;14.3.3.1. Unpaved Roads;381 12.1.3.3.2;14.3.3.2. Paved Roadways;382 12.1.3.4;14.3.4. Reinforcement for Erosion Control;383 12.1.4;Relevant ASTM Specifications;387 12.1.5;References;387 12.2;Chapter 15: In Situ Reinforcement;390 12.2.1;15.1. Types, Installations, Applications;390 12.2.1.1;15.1.1. Ground Anchors;390 12.2.1.2;15.1.2. Soil Nailing;393 12.2.1.3;15.1.3. Rock Bolts;396 12.2.1.4;15.1.4. Micropiles;397 12.2.2;15.2. Design Basics;400 12.2.2.1;15.2.1. Capacity Estimates;400 12.2.2.2;15.2.2. Spacing;401 12.2.2.3;15.2.3. Other Considerations;401 12.2.2.4;15.2.4. Testing and Monitoring;402 12.2.3;15.3. Helical Anchors and Piles;402 12.2.4;15.4. Other In Situ Reinforcement;405 12.2.5;Relevant ASTM Standards;405 12.2.6;References;406 12.3;Chapter 16: Soil Confinement;408 12.3.1;16.1. Concepts and History;408 12.3.2;16.2. Soldier Piles and Lagging;409 12.3.3;16.3. Cribs, Gabions and Mattresses;410 12.3.4;16.4. Geocells;415 12.3.5;16.5. Geosynthetically Confined Soil/Geosynthetic Reinforced Soil;423 12.3.6;16.6. Fabric Formwork and Geotubes;426 12.3.7;16.7. Erosion Control;427 12.3.8;Relevant ASTM Standards;430 12.3.9;References;430 12.4;Chapter 17: Lightweight Fill Materials;432 12.4.1;17.1. Types of Lightweight Fills;432 12.4.2;17.2. Properties of EPS Geofoam;433 12.4.3;17.3. Geofoam Applications;435 12.4.3.1;17.3.1. Construction with Geofoam;437 12.4.3.2;17.3.2. Other Construction Considerations;440 12.4.3.3;17.3.3. History and Case Studies;440 12.4.3.4;17.3.4. Case Studies;442 12.4.4;Relevant ASTM Standards;446 12.4.5;References;449 12.5;Chapter 18: Emerging Technologies, Trends, and Materials;452 12.5.1;18.1. Whats New-Whats Ahead?;452 12.5.2;18.2. Utilization of Wastes;453 12.5.3;18.3. Bioremediation;455 12.5.3.1;18.3.1. Biostabilization Applications;455 12.5.3.2;18.3.2. Contaminant Remediation;455 12.5.3.3;18.3.3. Inorganic Precipitation;456 12.5.4;References;456 13;Standard Sieve Sizes;458 14;Approximate Conversions to SI Units;460 15;Index;464